From 925087356b853e2099c1b60d8b757d7aa02121a9 Mon Sep 17 00:00:00 2001 From: Chris Dyer Date: Tue, 2 Oct 2012 00:19:43 -0400 Subject: cdec cleanup, remove bayesian stuff, parsing stuff --- jam-files/boost-build/tools/python.jam | 1267 -------------------------------- 1 file changed, 1267 deletions(-) delete mode 100644 jam-files/boost-build/tools/python.jam (limited to 'jam-files/boost-build/tools/python.jam') diff --git a/jam-files/boost-build/tools/python.jam b/jam-files/boost-build/tools/python.jam deleted file mode 100644 index 97a9f9a5..00000000 --- a/jam-files/boost-build/tools/python.jam +++ /dev/null @@ -1,1267 +0,0 @@ -# Copyright 2004 Vladimir Prus. -# Distributed under the Boost Software License, Version 1.0. (See -# accompanying file LICENSE_1_0.txt or copy at -# http://www.boost.org/LICENSE_1_0.txt) - -# Support for Python and the the Boost.Python library. -# -# This module defines -# -# - a project 'python' with a target 'python' in it, that corresponds to the -# python library -# -# - a main target rule 'python-extension' which can be used to build a python -# extension. -# -# Extensions that use Boost.Python must explicitly link to it. - -import type ; -import testing ; -import generators ; -import project ; -import errors ; -import targets ; -import "class" : new ; -import os ; -import common ; -import toolset ; -import regex ; -import numbers ; -import string ; -import property ; -import sequence ; -import path ; -import feature ; -import set ; -import builtin ; -import version ; - - -# Make this module a project. -project.initialize $(__name__) ; -project python ; - -# Save the project so that if 'init' is called several times we define new -# targets in the python project, not in whatever project we were called by. -.project = [ project.current ] ; - -# Dynamic linker lib. Necessary to specify it explicitly on some platforms. -lib dl ; -# This contains 'openpty' function need by python. Again, on some system need to -# pass this to linker explicitly. -lib util ; -# Python uses pthread symbols. -lib pthread ; -# Extra library needed by phtread on some platforms. -lib rt ; - -# The pythonpath feature specifies additional elements for the PYTHONPATH -# environment variable, set by run-pyd. For example, pythonpath can be used to -# access Python modules that are part of the product being built, but are not -# installed in the development system's default paths. -feature.feature pythonpath : : free optional path ; - -# Initializes the Python toolset. Note that all parameters are optional. -# -# - version -- the version of Python to use. Should be in Major.Minor format, -# for example 2.3. Do not include the subminor version. -# -# - cmd-or-prefix: Preferably, a command that invokes a Python interpreter. -# Alternatively, the installation prefix for Python libraries and includes. If -# empty, will be guessed from the version, the platform's installation -# patterns, and the python executables that can be found in PATH. -# -# - includes: the include path to Python headers. If empty, will be guessed. -# -# - libraries: the path to Python library binaries. If empty, will be guessed. -# On MacOS/Darwin, you can also pass the path of the Python framework. -# -# - condition: if specified, should be a set of properties that are matched -# against the build configuration when Boost.Build selects a Python -# configuration to use. -# -# - extension-suffix: A string to append to the name of extension modules before -# the true filename extension. Ordinarily we would just compute this based on -# the value of the feature. However ubuntu's python-dbg -# package uses the windows convention of appending _d to debug-build extension -# modules. We have no way of detecting ubuntu, or of probing python for the -# "_d" requirement, and if you configure and build python using -# --with-pydebug, you'll be using the standard *nix convention. Defaults to "" -# (or "_d" when targeting windows and is set). -# -# Example usage: -# -# using python : 2.3 ; -# using python : 2.3 : /usr/local/bin/python ; -# -rule init ( version ? : cmd-or-prefix ? : includes * : libraries ? - : condition * : extension-suffix ? ) -{ - project.push-current $(.project) ; - - debug-message Configuring python... ; - for local v in version cmd-or-prefix includes libraries condition - { - if $($(v)) - { - debug-message " user-specified "$(v): \"$($(v))\" ; - } - } - - configure $(version) : $(cmd-or-prefix) : $(includes) : $(libraries) : $(condition) : $(extension-suffix) ; - - project.pop-current ; -} - -# A simpler version of SHELL that grabs stderr as well as stdout, but returns -# nothing if there was an error. -# -local rule shell-cmd ( cmd ) -{ - debug-message running command '$(cmd)" 2>&1"' ; - x = [ SHELL $(cmd)" 2>&1" : exit-status ] ; - if $(x[2]) = 0 - { - return $(x[1]) ; - } - else - { - return ; - } -} - - -# Try to identify Cygwin symlinks. Invoking such a file directly as an NT -# executable from a native Windows build of bjam would be fatal to the bjam -# process. One /can/ invoke them through sh.exe or bash.exe, if you can prove -# that those are not also symlinks. ;-) -# -# If a symlink is found returns non-empty; we try to extract the target of the -# symlink from the file and return that. -# -# Note: 1. only works on NT 2. path is a native path. -local rule is-cygwin-symlink ( path ) -{ - local is-symlink = ; - - # Look for a file with the given path having the S attribute set, as cygwin - # symlinks do. /-C means "do not use thousands separators in file sizes." - local dir-listing = [ shell-cmd "DIR /-C /A:S \""$(path)"\"" ] ; - - if $(dir-listing) - { - # Escape any special regex characters in the base part of the path. - local base-pat = [ regex.escape $(path:D=) : ].[()*+?|\\$^ : \\ ] ; - - # Extract the file's size from the directory listing. - local size-of-system-file = [ MATCH "([0-9]+) "$(base-pat) : $(dir-listing) : 1 ] ; - - # If the file has a reasonably small size, look for the special symlink - # identification text. - if $(size-of-system-file) && [ numbers.less $(size-of-system-file) 1000 ] - { - local link = [ SHELL "FIND /OFF \"!\" \""$(path)"\" 2>&1" ] ; - if $(link[2]) != 0 - { - local nl = " - -" ; - is-symlink = [ MATCH ".*!([^"$(nl)"]*)" : $(link[1]) : 1 ] ; - if $(is-symlink) - { - is-symlink = [ *nix-path-to-native $(is-symlink) ] ; - is-symlink = $(is-symlink:R=$(path:D)) ; - } - - } - } - } - return $(is-symlink) ; -} - - -# Append ext to each member of names that does not contain '.'. -# -local rule default-extension ( names * : ext * ) -{ - local result ; - for local n in $(names) - { - switch $(n) - { - case *.* : result += $(n) ; - case * : result += $(n)$(ext) ; - } - } - return $(result) ; -} - - -# Tries to determine whether invoking "cmd" would actually attempt to launch a -# cygwin symlink. -# -# Note: only works on NT. -# -local rule invokes-cygwin-symlink ( cmd ) -{ - local dirs = $(cmd:D) ; - if ! $(dirs) - { - dirs = . [ os.executable-path ] ; - } - local base = [ default-extension $(cmd:D=) : .exe .cmd .bat ] ; - local paths = [ GLOB $(dirs) : $(base) ] ; - if $(paths) - { - # Make sure we have not run into a Cygwin symlink. Invoking such a file - # as an NT executable would be fatal for the bjam process. - return [ is-cygwin-symlink $(paths[1]) ] ; - } -} - - -local rule debug-message ( message * ) -{ - if --debug-configuration in [ modules.peek : ARGV ] - { - ECHO notice: [python-cfg] $(message) ; - } -} - - -# Like W32_GETREG, except prepend HKEY_CURRENT_USER\SOFTWARE and -# HKEY_LOCAL_MACHINE\SOFTWARE to the first argument, returning the first result -# found. Also accounts for the fact that on 64-bit machines, 32-bit software has -# its own area, under SOFTWARE\Wow6432node. -# -local rule software-registry-value ( path : data ? ) -{ - local result ; - for local root in HKEY_CURRENT_USER HKEY_LOCAL_MACHINE - { - for local x64elt in "" Wow6432node\\ # Account for 64-bit windows - { - if ! $(result) - { - result = [ W32_GETREG $(root)\\SOFTWARE\\$(x64elt)$(path) : $(data) ] ; - } - } - - } - return $(result) ; -} - - -.windows-drive-letter-re = ^([A-Za-z]):[\\/](.*) ; -.cygwin-drive-letter-re = ^/cygdrive/([a-z])/(.*) ; - -.working-directory = [ PWD ] ; -.working-drive-letter = [ SUBST $(.working-directory) $(.windows-drive-letter-re) $1 ] ; -.working-drive-letter ?= [ SUBST $(.working-directory) $(.cygwin-drive-letter-re) $1 ] ; - - -local rule windows-to-cygwin-path ( path ) -{ - # If path is rooted with a drive letter, rewrite it using the /cygdrive - # mountpoint. - local p = [ SUBST $(path:T) $(.windows-drive-letter-re) /cygdrive/$1/$2 ] ; - - # Else if path is rooted without a drive letter, use the working directory. - p ?= [ SUBST $(path:T) ^/(.*) /cygdrive/$(.working-drive-letter:L)/$2 ] ; - - # Else return the path unchanged. - return $(p:E=$(path:T)) ; -} - - -# :W only works in Cygwin builds of bjam. This one works on NT builds as well. -# -local rule cygwin-to-windows-path ( path ) -{ - path = $(path:R="") ; # strip any trailing slash - - local drive-letter = [ SUBST $(path) $(.cygwin-drive-letter-re) $1:/$2 ] ; - if $(drive-letter) - { - path = $(drive-letter) ; - } - else if $(path:R=/x) = $(path) # already rooted? - { - # Look for a cygwin mount that includes each head sequence in $(path). - local head = $(path) ; - local tail = "" ; - - while $(head) - { - local root = [ software-registry-value - "Cygnus Solutions\\Cygwin\\mounts v2\\"$(head) : native ] ; - - if $(root) - { - path = $(tail:R=$(root)) ; - head = ; - } - tail = $(tail:R=$(head:D=)) ; - - if $(head) = / - { - head = ; - } - else - { - head = $(head:D) ; - } - } - } - return [ regex.replace $(path:R="") / \\ ] ; -} - - -# Convert a *nix path to native. -# -local rule *nix-path-to-native ( path ) -{ - if [ os.name ] = NT - { - path = [ cygwin-to-windows-path $(path) ] ; - } - return $(path) ; -} - - -# Convert an NT path to native. -# -local rule windows-path-to-native ( path ) -{ - if [ os.name ] = NT - { - return $(path) ; - } - else - { - return [ windows-to-cygwin-path $(path) ] ; - } -} - - -# Return nonempty if path looks like a windows path, i.e. it starts with a drive -# letter or contains backslashes. -# -local rule guess-windows-path ( path ) -{ - return [ SUBST $(path) ($(.windows-drive-letter-re)|.*([\\]).*) $1 ] ; -} - - -local rule path-to-native ( paths * ) -{ - local result ; - - for local p in $(paths) - { - if [ guess-windows-path $(p) ] - { - result += [ windows-path-to-native $(p) ] ; - } - else - { - result += [ *nix-path-to-native $(p:T) ] ; - } - } - return $(result) ; -} - - -# Validate the version string and extract the major/minor part we care about. -# -local rule split-version ( version ) -{ - local major-minor = [ MATCH ^([0-9]+)\.([0-9]+)(.*)$ : $(version) : 1 2 3 ] ; - if ! $(major-minor[2]) || $(major-minor[3]) - { - ECHO "Warning: \"using python\" expects a two part (major, minor) version number; got" $(version) instead ; - - # Add a zero to account for the missing digit if necessary. - major-minor += 0 ; - } - - return $(major-minor[1]) $(major-minor[2]) ; -} - - -# Build a list of versions from 3.0 down to 1.5. Because bjam can not enumerate -# registry sub-keys, we have no way of finding a version with a 2-digit minor -# version, e.g. 2.10 -- let us hope that never happens. -# -.version-countdown = ; -for local v in [ numbers.range 15 30 ] -{ - .version-countdown = [ SUBST $(v) (.)(.*) $1.$2 ] $(.version-countdown) ; -} - - -local rule windows-installed-pythons ( version ? ) -{ - version ?= $(.version-countdown) ; - local interpreters ; - - for local v in $(version) - { - local install-path = [ - software-registry-value "Python\\PythonCore\\"$(v)"\\InstallPath" ] ; - - if $(install-path) - { - install-path = [ windows-path-to-native $(install-path) ] ; - debug-message Registry indicates Python $(v) installed at \"$(install-path)\" ; - } - - interpreters += $(:E=python:R=$(install-path)) ; - } - return $(interpreters) ; -} - - -local rule darwin-installed-pythons ( version ? ) -{ - version ?= $(.version-countdown) ; - - local prefix - = [ GLOB /System/Library/Frameworks /Library/Frameworks - : Python.framework ] ; - - return $(prefix)/Versions/$(version)/bin/python ; -} - - -# Assume "python-cmd" invokes a python interpreter and invoke it to extract all -# the information we care about from its "sys" module. Returns void if -# unsuccessful. -# -local rule probe ( python-cmd ) -{ - # Avoid invoking a Cygwin symlink on NT. - local skip-symlink ; - if [ os.name ] = NT - { - skip-symlink = [ invokes-cygwin-symlink $(python-cmd) ] ; - } - - if $(skip-symlink) - { - debug-message -------------------------------------------------------------------- ; - debug-message \"$(python-cmd)\" would attempt to invoke a Cygwin symlink, ; - debug-message causing a bjam built for Windows to hang. ; - debug-message ; - debug-message If you intend to target a Cygwin build of Python, please ; - debug-message replace the path to the link with the path to a real executable ; - debug-message (guessing: \"$(skip-symlink)\") "in" your 'using python' line ; - debug-message "in" user-config.jam or site-config.jam. Do not forget to escape ; - debug-message backslashes ; - debug-message -------------------------------------------------------------------- ; - } - else - { - # Prepare a List of Python format strings and expressions that can be - # used to print the constants we want from the sys module. - - # We do not really want sys.version since that is a complicated string, - # so get the information from sys.version_info instead. - local format = "version=%d.%d" ; - local exprs = "version_info[0]" "version_info[1]" ; - - for local s in $(sys-elements[2-]) - { - format += $(s)=%s ; - exprs += $(s) ; - } - - # Invoke Python and ask it for all those values. - if [ version.check-jam-version 3 1 17 ] || ( [ os.name ] != NT ) - { - # Prior to version 3.1.17 Boost Jam's SHELL command did not support - # quoted commands correctly on Windows. This means that on that - # platform we do not support using a Python command interpreter - # executable whose path contains a space character. - python-cmd = \"$(python-cmd)\" ; - } - local full-cmd = - $(python-cmd)" -c \"from sys import *; print('"$(format:J=\\n)"' % ("$(exprs:J=,)"))\"" ; - - local output = [ shell-cmd $(full-cmd) ] ; - if $(output) - { - # Parse the output to get all the results. - local nl = " - -" ; - for s in $(sys-elements) - { - # These variables are expected to be declared local in the - # caller, so Jam's dynamic scoping will set their values there. - sys.$(s) = [ SUBST $(output) \\<$(s)=([^$(nl)]+) $1 ] ; - } - } - return $(output) ; - } -} - - -# Make sure the "libraries" and "includes" variables (in an enclosing scope) -# have a value based on the information given. -# -local rule compute-default-paths ( target-os : version ? : prefix ? : - exec-prefix ? ) -{ - exec-prefix ?= $(prefix) ; - - if $(target-os) = windows - { - # The exec_prefix is where you're supposed to look for machine-specific - # libraries. - local default-library-path = $(exec-prefix)\\libs ; - local default-include-path = $(:E=Include:R=$(prefix)) ; - - # If the interpreter was found in a directory called "PCBuild" or - # "PCBuild8," assume we're looking at a Python built from the source - # distro, and go up one additional level to the default root. Otherwise, - # the default root is the directory where the interpreter was found. - - # We ask Python itself what the executable path is in case of - # intermediate symlinks or shell scripts. - local executable-dir = $(sys.executable:D) ; - - if [ MATCH ^(PCBuild) : $(executable-dir:D=) ] - { - debug-message "This Python appears to reside in a source distribution;" ; - debug-message "prepending \""$(executable-dir)"\" to default library search path" ; - - default-library-path = $(executable-dir) $(default-library-path) ; - - default-include-path = $(:E=PC:R=$(executable-dir:D)) $(default-include-path) ; - - debug-message "and \""$(default-include-path[1])"\" to default #include path" ; - } - - libraries ?= $(default-library-path) ; - includes ?= $(default-include-path) ; - } - else - { - includes ?= $(prefix)/include/python$(version) ; - - local lib = $(exec-prefix)/lib ; - libraries ?= $(lib)/python$(version)/config $(lib) ; - } -} - -# The version of the python interpreter to use. -feature.feature python : : propagated ; -feature.feature python.interpreter : : free ; - -toolset.flags python.capture-output PYTHON : ; - -# -# Support for Python configured --with-pydebug -# -feature.feature python-debugging : off on : propagated ; -builtin.variant debug-python : debug : on ; - - -# Return a list of candidate commands to try when looking for a Python -# interpreter. prefix is expected to be a native path. -# -local rule candidate-interpreters ( version ? : prefix ? : target-os ) -{ - local bin-path = bin ; - if $(target-os) = windows - { - # On Windows, look in the root directory itself and, to work with the - # result of a build-from-source, the PCBuild directory. - bin-path = PCBuild8 PCBuild "" ; - } - - bin-path = $(bin-path:R=$(prefix)) ; - - if $(target-os) in windows darwin - { - return # Search: - $(:E=python:R=$(bin-path)) # Relative to the prefix, if any - python # In the PATH - [ $(target-os)-installed-pythons $(version) ] # Standard install locations - ; - } - else - { - # Search relative to the prefix, or if none supplied, in PATH. - local unversioned = $(:E=python:R=$(bin-path:E=)) ; - - # If a version was specified, look for a python with that specific - # version appended before looking for one called, simply, "python" - return $(unversioned)$(version) $(unversioned) ; - } -} - - -# Compute system library dependencies for targets linking with static Python -# libraries. -# -# On many systems, Python uses libraries such as pthreads or libdl. Since static -# libraries carry no library dependency information of their own that the linker -# can extract, these extra dependencies have to be given explicitly on the link -# line of the client. The information about these dependencies is packaged into -# the "python" target below. -# -# Even where Python itself uses pthreads, it never allows extension modules to -# be entered concurrently (unless they explicitly give up the interpreter lock). -# Therefore, extension modules do not need the efficiency overhead of threadsafe -# code as produced by multi, and we handle libpthread along with -# other libraries here. Note: this optimization is based on an assumption that -# the compiler generates link-compatible code in both the single- and -# multi-threaded cases, and that system libraries do not change their ABIs -# either. -# -# Returns a list of usage-requirements that link to the necessary system -# libraries. -# -local rule system-library-dependencies ( target-os ) -{ - switch $(target-os) - { - case s[uo][nl]* : # solaris, sun, sunos - # Add a librt dependency for the gcc toolset on SunOS (the sun - # toolset adds -lrt unconditionally). While this appears to - # duplicate the logic already in gcc.jam, it does not as long as - # we are not forcing multi. - - # On solaris 10, distutils.sysconfig.get_config_var('LIBS') yields - # '-lresolv -lsocket -lnsl -lrt -ldl'. However, that does not seem - # to be the right list for extension modules. For example, on my - # installation, adding -ldl causes at least one test to fail because - # the library can not be found and removing it causes no failures. - - # Apparently, though, we need to add -lrt for gcc. - return gcc:rt ; - - case osf : return pthread gcc:rt ; - - case qnx* : return ; - case darwin : return ; - case windows : return ; - - case hpux : return rt ; - case *bsd : return pthread gcc:util ; - - case aix : return pthread dl ; - - case * : return pthread dl - gcc:util linux:util ; - } -} - - -# Declare a target to represent Python's library. -# -local rule declare-libpython-target ( version ? : requirements * ) -{ - # Compute the representation of Python version in the name of Python's - # library file. - local lib-version = $(version) ; - if windows in $(requirements) - { - local major-minor = [ split-version $(version) ] ; - lib-version = $(major-minor:J="") ; - if on in $(requirements) - { - lib-version = $(lib-version)_d ; - } - } - - if ! $(lib-version) - { - ECHO *** warning: could not determine Python version, which will ; - ECHO *** warning: probably prevent us from linking with the python ; - ECHO *** warning: library. Consider explicitly passing the version ; - ECHO *** warning: to 'using python'. ; - } - - # Declare it. - lib python.lib : : python$(lib-version) $(requirements) ; -} - - -# Implementation of init. -local rule configure ( version ? : cmd-or-prefix ? : includes * : libraries ? : - condition * : extension-suffix ? ) -{ - local prefix ; - local exec-prefix ; - local cmds-to-try ; - local interpreter-cmd ; - - local target-os = [ feature.get-values target-os : $(condition) ] ; - target-os ?= [ feature.defaults target-os ] ; - target-os = $(target-os:G=) ; - - if $(target-os) = windows && on in $(condition) - { - extension-suffix ?= _d ; - } - extension-suffix ?= "" ; - - # Normalize and dissect any version number. - local major-minor ; - if $(version) - { - major-minor = [ split-version $(version) ] ; - version = $(major-minor:J=.) ; - } - - local cmds-to-try ; - - if ! $(cmd-or-prefix) || [ GLOB $(cmd-or-prefix) : * ] - { - # If the user did not pass a command, whatever we got was a prefix. - prefix = $(cmd-or-prefix) ; - cmds-to-try = [ candidate-interpreters $(version) : $(prefix) : $(target-os) ] ; - } - else - { - # Work with the command the user gave us. - cmds-to-try = $(cmd-or-prefix) ; - - # On Windows, do not nail down the interpreter command just yet in case - # the user specified something that turns out to be a cygwin symlink, - # which could bring down bjam if we invoke it. - if $(target-os) != windows - { - interpreter-cmd = $(cmd-or-prefix) ; - } - } - - # Values to use in case we can not really find anything in the system. - local fallback-cmd = $(cmds-to-try[1]) ; - local fallback-version ; - - # Anything left to find or check? - if ! ( $(interpreter-cmd) && $(includes) && $(libraries) ) - { - # Values to be extracted from python's sys module. These will be set by - # the probe rule, above, using Jam's dynamic scoping. - local sys-elements = version platform prefix exec_prefix executable ; - local sys.$(sys-elements) ; - - # Compute the string Python's sys.platform needs to match. If not - # targeting Windows or cygwin we will assume only native builds can - # possibly run, so we will not require a match and we leave sys.platform - # blank. - local platform ; - switch $(target-os) - { - case windows : platform = win32 ; - case cygwin : platform = cygwin ; - } - - while $(cmds-to-try) - { - # Pop top command. - local cmd = $(cmds-to-try[1]) ; - cmds-to-try = $(cmds-to-try[2-]) ; - - debug-message Checking interpreter command \"$(cmd)\"... ; - if [ probe $(cmd) ] - { - fallback-version ?= $(sys.version) ; - - # Check for version/platform validity. - for local x in version platform - { - if $($(x)) && $($(x)) != $(sys.$(x)) - { - debug-message ...$(x) "mismatch (looking for" - $($(x)) but found $(sys.$(x))")" ; - cmd = ; - } - } - - if $(cmd) - { - debug-message ...requested configuration matched! ; - - exec-prefix = $(sys.exec_prefix) ; - - compute-default-paths $(target-os) : $(sys.version) : - $(sys.prefix) : $(sys.exec_prefix) ; - - version = $(sys.version) ; - interpreter-cmd ?= $(cmd) ; - cmds-to-try = ; # All done. - } - } - else - { - debug-message ...does not invoke a working interpreter ; - } - } - } - - # Anything left to compute? - if $(includes) && $(libraries) - { - .configured = true ; - } - else - { - version ?= $(fallback-version) ; - version ?= 2.5 ; - exec-prefix ?= $(prefix) ; - compute-default-paths $(target-os) : $(version) : $(prefix:E=) ; - } - - if ! $(interpreter-cmd) - { - fallback-cmd ?= python ; - debug-message No working Python interpreter found. ; - if [ os.name ] != NT || ! [ invokes-cygwin-symlink $(fallback-cmd) ] - { - interpreter-cmd = $(fallback-cmd) ; - debug-message falling back to \"$(interpreter-cmd)\" ; - } - } - - includes = [ path-to-native $(includes) ] ; - libraries = [ path-to-native $(libraries) ] ; - - debug-message "Details of this Python configuration:" ; - debug-message " interpreter command:" \"$(interpreter-cmd:E=)\" ; - debug-message " include path:" \"$(includes:E=)\" ; - debug-message " library path:" \"$(libraries:E=)\" ; - if $(target-os) = windows - { - debug-message " DLL search path:" \"$(exec-prefix:E=)\" ; - } - - # - # End autoconfiguration sequence. - # - local target-requirements = $(condition) ; - - # Add the version, if any, to the target requirements. - if $(version) - { - if ! $(version) in [ feature.values python ] - { - feature.extend python : $(version) ; - } - target-requirements += $(version:E=default) ; - } - - target-requirements += $(target-os) ; - - # See if we can find a framework directory on darwin. - local framework-directory ; - if $(target-os) = darwin - { - # Search upward for the framework directory. - local framework-directory = $(libraries[-1]) ; - while $(framework-directory:D=) && $(framework-directory:D=) != Python.framework - { - framework-directory = $(framework-directory:D) ; - } - - if $(framework-directory:D=) = Python.framework - { - debug-message framework directory is \"$(framework-directory)\" ; - } - else - { - debug-message "no framework directory found; using library path" ; - framework-directory = ; - } - } - - local dll-path = $(libraries) ; - - # Make sure that we can find the Python DLL on Windows. - if ( $(target-os) = windows ) && $(exec-prefix) - { - dll-path += $(exec-prefix) ; - } - - # - # Prepare usage requirements. - # - local usage-requirements = [ system-library-dependencies $(target-os) ] ; - usage-requirements += $(includes) $(interpreter-cmd) ; - if on in $(condition) - { - if $(target-os) = windows - { - # In pyconfig.h, Py_DEBUG is set if _DEBUG is set. If we define - # Py_DEBUG we will get multiple definition warnings. - usage-requirements += _DEBUG ; - } - else - { - usage-requirements += Py_DEBUG ; - } - } - - # Global, but conditional, requirements to give access to the interpreter - # for general utilities, like other toolsets, that run Python scripts. - toolset.add-requirements - $(target-requirements:J=,):$(interpreter-cmd) ; - - # Register the right suffix for extensions. - register-extension-suffix $(extension-suffix) : $(target-requirements) ; - - # - # Declare the "python" target. This should really be called - # python_for_embedding. - # - - if $(framework-directory) - { - alias python - : - : $(target-requirements) - : - : $(usage-requirements) $(framework-directory) - ; - } - else - { - declare-libpython-target $(version) : $(target-requirements) ; - - # This is an evil hack. On, Windows, when Python is embedded, nothing - # seems to set up sys.path to include Python's standard library - # (http://article.gmane.org/gmane.comp.python.general/544986). The evil - # here, aside from the workaround necessitated by Python's bug, is that: - # - # a. we're guessing the location of the python standard library from the - # location of pythonXX.lib - # - # b. we're hijacking the property to get the - # environment variable set up, and the user may want to use it for - # something else (e.g. launch the debugger). - local set-PYTHONPATH ; - if $(target-os) = windows - { - set-PYTHONPATH = [ common.prepend-path-variable-command PYTHONPATH : - $(libraries:D)/Lib ] ; - } - - alias python - : - : $(target-requirements) - : - # Why python.lib must be listed here instead of along with the - # system libs is a mystery, but if we do not do it, on cygwin, - # -lpythonX.Y never appears in the command line (although it does on - # linux). - : $(usage-requirements) - $(set-PYTHONPATH) - $(libraries) python.lib - ; - } - - # On *nix, we do not want to link either Boost.Python or Python extensions - # to libpython, because the Python interpreter itself provides all those - # symbols. If we linked to libpython, we would get duplicate symbols. So - # declare two targets -- one for building extensions and another for - # embedding. - # - # Unlike most *nix systems, Mac OS X's linker does not permit undefined - # symbols when linking a shared library. So, we still need to link against - # the Python framework, even when building extensions. Note that framework - # builds of Python always use shared libraries, so we do not need to worry - # about duplicate Python symbols. - if $(target-os) in windows cygwin darwin - { - alias python_for_extensions : python : $(target-requirements) ; - } - # On AIX we need Python extensions and Boost.Python to import symbols from - # the Python interpreter. Dynamic libraries opened with dlopen() do not - # inherit the symbols from the Python interpreter. - else if $(target-os) = aix - { - alias python_for_extensions - : - : $(target-requirements) - : - : $(usage-requirements) -Wl,-bI:$(libraries[1])/python.exp - ; - } - else - { - alias python_for_extensions - : - : $(target-requirements) - : - : $(usage-requirements) - ; - } -} - - -rule configured ( ) -{ - return $(.configured) ; -} - - -type.register PYTHON_EXTENSION : : SHARED_LIB ; - - -local rule register-extension-suffix ( root : condition * ) -{ - local suffix ; - - switch [ feature.get-values target-os : $(condition) ] - { - case windows : suffix = pyd ; - case cygwin : suffix = dll ; - case hpux : - { - if [ feature.get-values python : $(condition) ] in 1.5 1.6 2.0 2.1 2.2 2.3 2.4 - { - suffix = sl ; - } - else - { - suffix = so ; - } - } - case * : suffix = so ; - } - - type.set-generated-target-suffix PYTHON_EXTENSION : $(condition) : <$(root).$(suffix)> ; -} - - -# Unset 'lib' prefix for PYTHON_EXTENSION -type.set-generated-target-prefix PYTHON_EXTENSION : : "" ; - - -rule python-extension ( name : sources * : requirements * : default-build * : - usage-requirements * ) -{ - if [ configured ] - { - requirements += /python//python_for_extensions ; - } - requirements += true ; - - local project = [ project.current ] ; - - targets.main-target-alternative - [ new typed-target $(name) : $(project) : PYTHON_EXTENSION - : [ targets.main-target-sources $(sources) : $(name) ] - : [ targets.main-target-requirements $(requirements) : $(project) ] - : [ targets.main-target-default-build $(default-build) : $(project) ] - ] ; -} - -IMPORT python : python-extension : : python-extension ; - -rule py2to3 -{ - common.copy $(>) $(<) ; - 2to3 $(<) ; -} - -actions 2to3 -{ - 2to3 -wn "$(<)" - 2to3 -dwn "$(<)" -} - - -# Support for testing. -type.register PY : py ; -type.register RUN_PYD_OUTPUT ; -type.register RUN_PYD : : TEST ; - - -class python-test-generator : generator -{ - import set ; - - rule __init__ ( * : * ) - { - generator.__init__ $(1) : $(2) : $(3) : $(4) : $(5) : $(6) : $(7) : $(8) : $(9) ; - self.composing = true ; - } - - rule run ( project name ? : property-set : sources * : multiple ? ) - { - local pyversion = [ $(property-set).get ] ; - local python ; - local other-pythons ; - - # Make new target that converting Python source by 2to3 when running with Python 3. - local rule make-2to3-source ( source ) - { - if $(pyversion) >= 3.0 - { - local a = [ new action $(source) : python.py2to3 : $(property-set) ] ; - local t = [ utility.basename [ $(s).name ] ] ; - local p = [ new file-target $(t) : PY : $(project) : $(a) ] ; - return $(p) ; - } - else - { - return $(source) ; - } - } - - for local s in $(sources) - { - if [ $(s).type ] = PY - { - if ! $(python) - { - # First Python source ends up on command line. - python = [ make-2to3-source $(s) ] ; - - } - else - { - # Other Python sources become dependencies. - other-pythons += [ make-2to3-source $(s) ] ; - } - } - } - - local extensions ; - for local s in $(sources) - { - if [ $(s).type ] = PYTHON_EXTENSION - { - extensions += $(s) ; - } - } - - local libs ; - for local s in $(sources) - { - if [ type.is-derived [ $(s).type ] LIB ] - && ! $(s) in $(extensions) - { - libs += $(s) ; - } - } - - local new-sources ; - for local s in $(sources) - { - if [ type.is-derived [ $(s).type ] CPP ] - { - local name = [ utility.basename [ $(s).name ] ] ; - if $(name) = [ utility.basename [ $(python).name ] ] - { - name = $(name)_ext ; - } - local extension = [ generators.construct $(project) $(name) : - PYTHON_EXTENSION : $(property-set) : $(s) $(libs) ] ; - - # The important part of usage requirements returned from - # PYTHON_EXTENSION generator are xdll-path properties that will - # allow us to find the python extension at runtime. - property-set = [ $(property-set).add $(extension[1]) ] ; - - # Ignore usage requirements. We're a top-level generator and - # nobody is going to use what we generate. - new-sources += $(extension[2-]) ; - } - } - - property-set = [ $(property-set).add-raw $(other-pythons) ] ; - - result = [ construct-result $(python) $(extensions) $(new-sources) : - $(project) $(name) : $(property-set) ] ; - } -} - - -generators.register - [ new python-test-generator python.capture-output : : RUN_PYD_OUTPUT ] ; - -generators.register-standard testing.expect-success - : RUN_PYD_OUTPUT : RUN_PYD ; - - -# There are two different ways of spelling OS names. One is used for [ os.name ] -# and the other is used for the and properties. Until that -# is remedied, this sets up a crude mapping from the latter to the former, that -# will work *for the purposes of cygwin/NT cross-builds only*. Could not think -# of a better name than "translate". -# -.translate-os-windows = NT ; -.translate-os-cygwin = CYGWIN ; -local rule translate-os ( src-os ) -{ - local x = $(.translate-os-$(src-os)) [ os.name ] ; - return $(x[1]) ; -} - - -# Extract the path to a single ".pyd" source. This is used to build the -# PYTHONPATH for running bpl tests. -# -local rule pyd-pythonpath ( source ) -{ - return [ on $(source) return $(LOCATE) $(SEARCH) ] ; -} - - -# The flag settings on testing.capture-output do not apply to python.capture -# output at the moment. Redo this explicitly. -toolset.flags python.capture-output ARGS ; - - -rule capture-output ( target : sources * : properties * ) -{ - # Setup up a proper DLL search path. Here, $(sources[1]) is a python module - # and $(sources[2]) is a DLL. Only $(sources[1]) is passed to - # testing.capture-output, so RUN_PATH variable on $(sources[2]) is not - # consulted. Move it over explicitly. - RUN_PATH on $(sources[1]) = [ on $(sources[2-]) return $(RUN_PATH) ] ; - - PYTHONPATH = [ sequence.transform pyd-pythonpath : $(sources[2-]) ] ; - PYTHONPATH += [ feature.get-values pythonpath : $(properties) ] ; - - # After test is run, we remove the Python module, but not the Python script. - testing.capture-output $(target) : $(sources[1]) : $(properties) : - $(sources[2-]) ; - - # PYTHONPATH is different; it will be interpreted by whichever Python is - # invoked and so must follow path rules for the target os. The only OSes - # where we can run python for other OSes currently are NT and CYGWIN so we - # only need to handle those cases. - local target-os = [ feature.get-values target-os : $(properties) ] ; - # Oddly, host-os is not in properties, so grab the default value. - local host-os = [ feature.defaults host-os ] ; - host-os = $(host-os:G=) ; - if $(target-os) != $(host-os) - { - PYTHONPATH = [ sequence.transform $(host-os)-to-$(target-os)-path : - $(PYTHONPATH) ] ; - } - local path-separator = [ os.path-separator [ translate-os $(target-os) ] ] ; - local set-PYTHONPATH = [ common.variable-setting-command PYTHONPATH : - $(PYTHONPATH:J=$(path-separator)) ] ; - LAUNCHER on $(target) = $(set-PYTHONPATH) [ on $(target) return \"$(PYTHON)\" ] ; -} - - -rule bpl-test ( name : sources * : requirements * ) -{ - local s ; - sources ?= $(name).py $(name).cpp ; - return [ testing.make-test run-pyd : $(sources) /boost/python//boost_python - : $(requirements) : $(name) ] ; -} - - -IMPORT $(__name__) : bpl-test : : bpl-test ; -- cgit v1.2.3