From 3faecf9a00512dcbc8712c4bca9adae72fb64410 Mon Sep 17 00:00:00 2001 From: Kenneth Heafield Date: Sat, 12 May 2012 14:01:52 -0400 Subject: Give in and copy bjam into cdec source code --- jam-files/boost-build/build/project.jam | 1110 +++++++++++++++++++++++++++++++ 1 file changed, 1110 insertions(+) create mode 100644 jam-files/boost-build/build/project.jam (limited to 'jam-files/boost-build/build/project.jam') diff --git a/jam-files/boost-build/build/project.jam b/jam-files/boost-build/build/project.jam new file mode 100644 index 00000000..c9967613 --- /dev/null +++ b/jam-files/boost-build/build/project.jam @@ -0,0 +1,1110 @@ +# Copyright 2002, 2003 Dave Abrahams +# Copyright 2002, 2005, 2006 Rene Rivera +# Copyright 2002, 2003, 2004, 2005, 2006 Vladimir Prus +# Distributed under the Boost Software License, Version 1.0. +# (See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt) + +# Implements project representation and loading. Each project is represented by: +# - a module where all the Jamfile content live. +# - an instance of 'project-attributes' class. +# (given a module name, can be obtained using the 'attributes' rule) +# - an instance of 'project-target' class (from targets.jam) +# (given a module name, can be obtained using the 'target' rule) +# +# Typically, projects are created as result of loading a Jamfile, which is done +# by rules 'load' and 'initialize', below. First, module for Jamfile is loaded +# and new project-attributes instance is created. Some rules necessary for +# project are added to the module (see 'project-rules' module) at the bottom of +# this file. Default project attributes are set (inheriting attributes of parent +# project, if it exists). After that the Jamfile is read. It can declare its own +# attributes using the 'project' rule which will be combined with any already +# set attributes. +# +# The 'project' rule can also declare a project id which will be associated with +# the project module. +# +# There can also be 'standalone' projects. They are created by calling +# 'initialize' on an arbitrary module and not specifying their location. After +# the call, the module can call the 'project' rule, declare main targets and +# behave as a regular project except that, since it is not associated with any +# location, it should not declare targets that are not prebuilt. +# +# The list of all loaded Jamfile is stored in the .project-locations variable. +# It is possible to obtain a module name for a location using the 'module-name' +# rule. Standalone projects are not recorded and can only be referenced using +# their project id. + +import "class" : new ; +import errors ; +import modules ; +import path ; +import print ; +import property-set ; +import sequence ; + + +# Loads the Jamfile at the given location. After loading, project global file +# and Jamfiles needed by the requested one will be loaded recursively. If the +# Jamfile at that location is loaded already, does nothing. Returns the project +# module for the Jamfile. +# +rule load ( jamfile-location ) +{ + if --debug-loading in [ modules.peek : ARGV ] + { + ECHO "Loading Jamfile at" '$(jamfile-location)' ; + } + + local module-name = [ module-name $(jamfile-location) ] ; + # If Jamfile is already loaded, don't try again. + if ! $(module-name) in $(.jamfile-modules) + { + load-jamfile $(jamfile-location) : $(module-name) ; + + # We want to make sure that child project are loaded only after parent + # projects. In particular, because parent projects define attributes + # which are inherited by children, and we don't want children to be + # loaded before parent has defined everything. + # + # While "build-project" and "use-project" can potentially refer to child + # projects from parent projects, we don't immediately load child + # projects when seeing those attributes. Instead, we record the minimal + # information to be used only later. + load-used-projects $(module-name) ; + } + return $(module-name) ; +} + + +rule load-used-projects ( module-name ) +{ + local used = [ modules.peek $(module-name) : .used-projects ] ; + local location = [ attribute $(module-name) location ] ; + import project ; + while $(used) + { + local id = $(used[1]) ; + local where = $(used[2]) ; + + project.use $(id) : [ path.root [ path.make $(where) ] $(location) ] ; + used = $(used[3-]) ; + } +} + + +# Note the use of character groups, as opposed to listing 'Jamroot' and +# 'jamroot'. With the latter, we would get duplicate matches on Windows and +# would have to eliminate duplicates. +JAMROOT ?= [ modules.peek : JAMROOT ] ; +JAMROOT ?= project-root.jam [Jj]amroot [Jj]amroot.jam ; + + +# Loads parent of Jamfile at 'location'. Issues an error if nothing is found. +# +rule load-parent ( location ) +{ + local found = [ path.glob-in-parents $(location) : $(JAMROOT) $(JAMFILE) ] ; + + if ! $(found) + { + ECHO error: Could not find parent for project at '$(location)' ; + EXIT error: Did not find Jamfile.jam or Jamroot.jam in any parent + directory. ; + } + + return [ load $(found[1]:D) ] ; +} + + +# Makes the specified 'module' act as if it were a regularly loaded Jamfile at +# 'location'. Reports an error if a Jamfile has already been loaded for that +# location. +# +rule act-as-jamfile ( module : location ) +{ + if [ module-name $(location) ] in $(.jamfile-modules) + { + errors.error "Jamfile was already loaded for '$(location)'" ; + } + # Set up non-default mapping from location to module. + .module.$(location) = $(module) ; + + # Add the location to the list of project locations so that we don't try to + # reload the same Jamfile in the future. + .jamfile-modules += [ module-name $(location) ] ; + + initialize $(module) : $(location) ; +} + + +# Returns the project module corresponding to the given project-id or plain +# directory name. Returns nothing if such a project can not be found. +# +rule find ( name : current-location ) +{ + local project-module ; + + # Try interpreting name as project id. + if [ path.is-rooted $(name) ] + { + project-module = $($(name).jamfile-module) ; + } + + if ! $(project-module) + { + local location = [ path.root [ path.make $(name) ] $(current-location) ] + ; + + # If no project is registered for the given location, try to load it. + # First see if we have a Jamfile. If not, then see if we might have a + # project root willing to act as a Jamfile. In that case, project root + # must be placed in the directory referred by id. + + project-module = [ module-name $(location) ] ; + if ! $(project-module) in $(.jamfile-modules) + { + if [ path.glob $(location) : $(JAMROOT) $(JAMFILE) ] + { + project-module = [ load $(location) ] ; + } + else + { + project-module = ; + } + } + } + + return $(project-module) ; +} + + +# Returns the name of the module corresponding to 'jamfile-location'. If no +# module corresponds to that location yet, associates the default module name +# with that location. +# +rule module-name ( jamfile-location ) +{ + if ! $(.module.$(jamfile-location)) + { + # Root the path, so that locations are always unambiguous. Without this, + # we can't decide if '../../exe/program1' and '.' are the same paths. + jamfile-location = [ path.root $(jamfile-location) [ path.pwd ] ] ; + .module.$(jamfile-location) = Jamfile<$(jamfile-location)> ; + } + return $(.module.$(jamfile-location)) ; +} + + +# Default patterns to search for the Jamfiles to use for build declarations. +# +JAMFILE = [ modules.peek : JAMFILE ] ; +JAMFILE ?= [Bb]uild.jam [Jj]amfile.v2 [Jj]amfile [Jj]amfile.jam ; + + +# Find the Jamfile at the given location. This returns the exact names of all +# the Jamfiles in the given directory. The optional parent-root argument causes +# this to search not the given directory but the ones above it up to the +# directory given in it. +# +rule find-jamfile ( + dir # The directory(s) to look for a Jamfile. + parent-root ? # Optional flag indicating to search for the parent Jamfile. + : no-errors ? + ) +{ + # Glob for all the possible Jamfiles according to the match pattern. + # + local jamfile-glob = ; + if $(parent-root) + { + if ! $(.parent-jamfile.$(dir)) + { + .parent-jamfile.$(dir) = [ path.glob-in-parents $(dir) : $(JAMFILE) + ] ; + } + jamfile-glob = $(.parent-jamfile.$(dir)) ; + } + else + { + if ! $(.jamfile.$(dir)) + { + .jamfile.$(dir) = [ path.glob $(dir) : $(JAMFILE) ] ; + } + jamfile-glob = $(.jamfile.$(dir)) ; + + } + + local jamfile-to-load = $(jamfile-glob) ; + # Multiple Jamfiles found in the same place. Warn about this and ensure we + # use only one of them. As a temporary convenience measure, if there is + # Jamfile.v2 among found files, suppress the warning and use it. + # + if $(jamfile-to-load[2-]) + { + local v2-jamfiles = [ MATCH (.*[Jj]amfile\\.v2)|(.*[Bb]uild\\.jam) : $(jamfile-to-load) ] ; + + if $(v2-jamfiles) && ! $(v2-jamfiles[2]) + { + jamfile-to-load = $(v2-jamfiles) ; + } + else + { + local jamfile = [ path.basename $(jamfile-to-load[1]) ] ; + ECHO "warning: Found multiple Jamfiles at '"$(dir)"'!" + "Loading the first one: '$(jamfile)'." ; + } + + jamfile-to-load = $(jamfile-to-load[1]) ; + } + + # Could not find it, error. + # + if ! $(no-errors) && ! $(jamfile-to-load) + { + errors.error Unable to load Jamfile. + : Could not find a Jamfile in directory '$(dir)'. + : Attempted to find it with pattern '"$(JAMFILE:J=" ")"'. + : Please consult the documentation at 'http://www.boost.org'. ; + } + + return $(jamfile-to-load) ; +} + + +# Load a Jamfile at the given directory. Returns nothing. Will attempt to load +# the file as indicated by the JAMFILE patterns. Effect of calling this rule +# twice with the same 'dir' is undefined. +# +local rule load-jamfile ( + dir # The directory of the project Jamfile. + : jamfile-module + ) +{ + # See if the Jamfile is where it should be. + # + local jamfile-to-load = [ path.glob $(dir) : $(JAMROOT) ] ; + if ! $(jamfile-to-load) + { + jamfile-to-load = [ find-jamfile $(dir) ] ; + } + + if $(jamfile-to-load[2]) + { + errors.error "Multiple Jamfiles found at '$(dir)'" + : "Filenames are: " $(jamfile-to-load:D=) ; + } + + # Now load the Jamfile in it's own context. + # The call to 'initialize' may load parent Jamfile, which might have + # 'use-project' statement that causes a second attempt to load the + # same project we're loading now. Checking inside .jamfile-modules + # prevents that second attempt from messing up. + if ! $(jamfile-module) in $(.jamfile-modules) + { + .jamfile-modules += $(jamfile-module) ; + + # Initialize the Jamfile module before loading. + # + initialize $(jamfile-module) : [ path.parent $(jamfile-to-load) ] + : $(jamfile-to-load:BS) ; + + local saved-project = $(.current-project) ; + + mark-as-user $(jamfile-module) ; + modules.load $(jamfile-module) : [ path.native $(jamfile-to-load) ] : . ; + if [ MATCH ($(JAMROOT)) : $(jamfile-to-load:BS) ] + { + jamfile = [ find-jamfile $(dir) : no-errors ] ; + if $(jamfile) + { + load-aux $(jamfile-module) : [ path.native $(jamfile) ] ; + } + } + + # Now do some checks. + if $(.current-project) != $(saved-project) + { + errors.error "The value of the .current-project variable has magically" + : "changed after loading a Jamfile. This means some of the targets" + : "might be defined in the wrong project." + : "after loading" $(jamfile-module) + : "expected value" $(saved-project) + : "actual value" $(.current-project) ; + } + + if $(.global-build-dir) + { + local id = [ attribute $(jamfile-module) id ] ; + local project-root = [ attribute $(jamfile-module) project-root ] ; + local location = [ attribute $(jamfile-module) location ] ; + + if $(location) && $(project-root) = $(dir) + { + # This is Jamroot. + if ! $(id) + { + ECHO "warning: the --build-dir option was specified" ; + ECHO "warning: but Jamroot at '$(dir)'" ; + ECHO "warning: specified no project id" ; + ECHO "warning: the --build-dir option will be ignored" ; + } + } + } + } +} + + +rule mark-as-user ( module-name ) +{ + if USER_MODULE in [ RULENAMES ] + { + USER_MODULE $(module-name) ; + } +} + + +rule load-aux ( module-name : file ) +{ + mark-as-user $(module-name) ; + + module $(module-name) + { + include $(2) ; + local rules = [ RULENAMES $(1) ] ; + IMPORT $(1) : $(rules) : $(1) : $(1).$(rules) ; + } +} + + +.global-build-dir = [ MATCH --build-dir=(.*) : [ modules.peek : ARGV ] ] ; +if $(.global-build-dir) +{ + # If the option is specified several times, take the last value. + .global-build-dir = [ path.make $(.global-build-dir[-1]) ] ; +} + + +# Initialize the module for a project. +# +rule initialize ( + module-name # The name of the project module. + : location ? # The location (directory) of the project to initialize. If + # not specified, a standalone project will be initialized. + : basename ? + ) +{ + if --debug-loading in [ modules.peek : ARGV ] + { + ECHO "Initializing project '$(module-name)'" ; + } + + # TODO: need to consider if standalone projects can do anything but define + # prebuilt targets. If so, we need to give it a more sensible "location", so + # that source paths are correct. + location ?= "" ; + # Create the module for the Jamfile first. + module $(module-name) + { + } + $(module-name).attributes = [ new project-attributes $(location) + $(module-name) ] ; + local attributes = $($(module-name).attributes) ; + + if $(location) + { + $(attributes).set source-location : [ path.make $(location) ] : exact ; + } + else if ! $(module-name) in test-config site-config user-config project-config + { + # This is a standalone project with known location. Set source location + # so that it can declare targets. This is intended so that you can put + # a .jam file in your sources and use it via 'using'. Standard modules + # (in 'tools' subdir) may not assume source dir is set. + local s = [ modules.binding $(module-name) ] ; + if ! $(s) + { + errors.error "Could not determine project location $(module-name)" ; + } + $(attributes).set source-location : $(s:D) : exact ; + } + + $(attributes).set requirements : [ property-set.empty ] : exact ; + $(attributes).set usage-requirements : [ property-set.empty ] : exact ; + + # Import rules common to all project modules from project-rules module, + # defined at the end of this file. + local rules = [ RULENAMES project-rules ] ; + IMPORT project-rules : $(rules) : $(module-name) : $(rules) ; + + local jamroot ; + + local parent-module ; + if $(module-name) = test-config + { + # No parent. + } + else if $(module-name) = site-config + { + parent-module = test-config ; + } + else if $(module-name) = user-config + { + parent-module = site-config ; + } + else if $(module-name) = project-config + { + parent-module = user-config ; + } + else + { + # We search for parent/project-root only if Jamfile was specified, i.e. + # if the project is not standalone. + if $(location) && ! [ MATCH ($(JAMROOT)) : $(basename) ] + { + parent-module = [ load-parent $(location) ] ; + } + else + { + # It's either jamroot or standalone project. If it's jamroot, + # inherit from user-config. + if $(location) + { + # If project-config module exist, inherit from it. + if $(project-config.attributes) + { + parent-module = project-config ; + } + else + { + parent-module = user-config ; + } + jamroot = true ; + } + } + } + + if $(parent-module) + { + inherit-attributes $(module-name) : $(parent-module) ; + $(attributes).set parent-module : $(parent-module) : exact ; + } + + if $(jamroot) + { + $(attributes).set project-root : $(location) : exact ; + } + + local parent ; + if $(parent-module) + { + parent = [ target $(parent-module) ] ; + } + + if ! $(.target.$(module-name)) + { + .target.$(module-name) = [ new project-target $(module-name) + : $(module-name) $(parent) + : [ attribute $(module-name) requirements ] ] ; + + if --debug-loading in [ modules.peek : ARGV ] + { + ECHO "Assigned project target" $(.target.$(module-name)) + "to '$(module-name)'" ; + } + } + + .current-project = [ target $(module-name) ] ; +} + + +# Make 'project-module' inherit attributes of project root and parent module. +# +rule inherit-attributes ( project-module : parent-module ) +{ + local attributes = $($(project-module).attributes) ; + local pattributes = [ attributes $(parent-module) ] ; + # Parent module might be locationless configuration module. + if [ modules.binding $(parent-module) ] + { + $(attributes).set parent : [ path.parent + [ path.make [ modules.binding $(parent-module) ] ] ] ; + } + local v = [ $(pattributes).get project-root ] ; + $(attributes).set project-root : $(v) : exact ; + $(attributes).set default-build + : [ $(pattributes).get default-build ] ; + $(attributes).set requirements + : [ $(pattributes).get requirements ] : exact ; + $(attributes).set usage-requirements + : [ $(pattributes).get usage-requirements ] : exact ; + + local parent-build-dir = [ $(pattributes).get build-dir ] ; + if $(parent-build-dir) + { + # Have to compute relative path from parent dir to our dir. Convert both + # paths to absolute, since we cannot find relative path from ".." to + # ".". + + local location = [ attribute $(project-module) location ] ; + local parent-location = [ attribute $(parent-module) location ] ; + + local pwd = [ path.pwd ] ; + local parent-dir = [ path.root $(parent-location) $(pwd) ] ; + local our-dir = [ path.root $(location) $(pwd) ] ; + $(attributes).set build-dir : [ path.join $(parent-build-dir) + [ path.relative $(our-dir) $(parent-dir) ] ] : exact ; + } +} + + +# Associate the given id with the given project module. +# +rule register-id ( id : module ) +{ + $(id).jamfile-module = $(module) ; +} + + +# Class keeping all the attributes of a project. +# +# The standard attributes are "id", "location", "project-root", "parent" +# "requirements", "default-build", "source-location" and "projects-to-build". +# +class project-attributes +{ + import property ; + import property-set ; + import errors ; + import path ; + import print ; + import sequence ; + import project ; + + rule __init__ ( location project-module ) + { + self.location = $(location) ; + self.project-module = $(project-module) ; + } + + # Set the named attribute from the specification given by the user. The + # value actually set may be different. + # + rule set ( attribute : specification * + : exact ? # Sets value from 'specification' without any processing. + ) + { + if $(exact) + { + self.$(attribute) = $(specification) ; + } + else if $(attribute) = "requirements" + { + local result = [ property-set.refine-from-user-input + $(self.requirements) : $(specification) + : $(self.project-module) : $(self.location) ] ; + + if $(result[1]) = "@error" + { + errors.error Requirements for project at '$(self.location)' + conflict with parent's. : Explanation: $(result[2-]) ; + } + else + { + self.requirements = $(result) ; + } + } + else if $(attribute) = "usage-requirements" + { + local unconditional ; + for local p in $(specification) + { + local split = [ property.split-conditional $(p) ] ; + split ?= nothing $(p) ; + unconditional += $(split[2]) ; + } + + local non-free = [ property.remove free : $(unconditional) ] ; + if $(non-free) + { + errors.error usage-requirements $(specification) have non-free + properties $(non-free) ; + } + local t = [ property.translate-paths $(specification) + : $(self.location) ] ; + if $(self.usage-requirements) + { + self.usage-requirements = [ property-set.create + [ $(self.usage-requirements).raw ] $(t) ] ; + } + else + { + self.usage-requirements = [ property-set.create $(t) ] ; + } + } + else if $(attribute) = "default-build" + { + self.default-build = [ property.make $(specification) ] ; + } + else if $(attribute) = "source-location" + { + self.source-location = ; + for local src-path in $(specification) + { + self.source-location += [ path.root [ path.make $(src-path) ] + $(self.location) ] ; + } + } + else if $(attribute) = "build-dir" + { + self.build-dir = [ path.root + [ path.make $(specification) ] $(self.location) ] ; + } + else if $(attribute) = "id" + { + id = [ path.root $(specification) / ] ; + project.register-id $(id) : $(self.project-module) ; + self.id = $(id) ; + } + else if ! $(attribute) in "default-build" "location" "parent" + "projects-to-build" "project-root" "source-location" + { + errors.error Invalid project attribute '$(attribute)' specified for + project at '$(self.location)' ; + } + else + { + self.$(attribute) = $(specification) ; + } + } + + # Returns the value of the given attribute. + # + rule get ( attribute ) + { + return $(self.$(attribute)) ; + } + + # Prints the project attributes. + # + rule print ( ) + { + local id = $(self.id) ; id ?= (none) ; + local parent = $(self.parent) ; parent ?= (none) ; + print.section "'"$(id)"'" ; + print.list-start ; + print.list-item "Parent project:" $(parent) ; + print.list-item "Requirements:" [ $(self.requirements).raw ] ; + print.list-item "Default build:" $(self.default-build) ; + print.list-item "Source location:" $(self.source-location) ; + print.list-item "Projects to build:" + [ sequence.insertion-sort $(self.projects-to-build) ] ; + print.list-end ; + } +} + + +# Returns the project which is currently being loaded. +# +rule current ( ) +{ + return $(.current-project) ; +} + + +# Temporarily changes the current project to 'project'. Should be followed by +# 'pop-current'. +# +rule push-current ( project ) +{ + .saved-current-project += $(.current-project) ; + .current-project = $(project) ; +} + + +rule pop-current ( ) +{ + .current-project = $(.saved-current-project[-1]) ; + .saved-current-project = $(.saved-current-project[1--2]) ; +} + + +# Returns the project-attribute instance for the specified Jamfile module. +# +rule attributes ( project ) +{ + return $($(project).attributes) ; +} + + +# Returns the value of the specified attribute in the specified Jamfile module. +# +rule attribute ( project attribute ) +{ + return [ $($(project).attributes).get $(attribute) ] ; +} + + +# Returns the project target corresponding to the 'project-module'. +# +rule target ( project-module ) +{ + if ! $(.target.$(project-module)) + { + .target.$(project-module) = [ new project-target $(project-module) + : $(project-module) + : [ attribute $(project-module) requirements ] ] ; + } + return $(.target.$(project-module)) ; +} + + +# Use/load a project. +# +rule use ( id : location ) +{ + local saved-project = $(.current-project) ; + local project-module = [ project.load $(location) ] ; + local declared-id = [ project.attribute $(project-module) id ] ; + + if ! $(declared-id) || $(declared-id) != $(id) + { + # The project at 'location' either has no id or that id is not equal to + # the 'id' parameter. + if $($(id).jamfile-module) && ( $($(id).jamfile-module) != + $(project-module) ) + { + errors.user-error Attempt to redeclare already existing project id + '$(id)' + location '$(location)' ; + } + $(id).jamfile-module = $(project-module) ; + } + .current-project = $(saved-project) ; +} + + +# Defines a Boost.Build extension project. Such extensions usually contain +# library targets and features that can be used by many people. Even though +# extensions are really projects, they can be initialized as a module would be +# with the "using" (project.project-rules.using) mechanism. +# +rule extension ( id : options * : * ) +{ + # The caller is a standalone module for the extension. + local mod = [ CALLER_MODULE ] ; + + # We need to do the rest within the extension module. + module $(mod) + { + import path ; + + # Find the root project. + local root-project = [ project.current ] ; + root-project = [ $(root-project).project-module ] ; + while + [ project.attribute $(root-project) parent-module ] && + [ project.attribute $(root-project) parent-module ] != user-config + { + root-project = [ project.attribute $(root-project) parent-module ] ; + } + + # Create the project data, and bring in the project rules into the + # module. + project.initialize $(__name__) : [ path.join [ project.attribute + $(root-project) location ] ext $(1:L) ] ; + + # Create the project itself, i.e. the attributes. All extensions are + # created in the "/ext" project space. + project /ext/$(1) : $(2) : $(3) : $(4) : $(5) : $(6) : $(7) : $(8) : + $(9) ; + local attributes = [ project.attributes $(__name__) ] ; + + # Inherit from the root project of whomever is defining us. + project.inherit-attributes $(__name__) : $(root-project) ; + $(attributes).set parent-module : $(root-project) : exact ; + } +} + + +rule glob-internal ( project : wildcards + : excludes * : rule-name ) +{ + local location = [ $(project).get source-location ] ; + + local result ; + local paths = [ path.$(rule-name) $(location) : + [ sequence.transform path.make : $(wildcards) ] : + [ sequence.transform path.make : $(excludes) ] ] ; + if $(wildcards:D) || $(rule-name) != glob + { + # The paths we have found are relative to the current directory, but the + # names specified in the sources list are assumed to be relative to the + # source directory of the corresponding project. So, just make the names + # absolute. + for local p in $(paths) + { + # If the path is below source location, use relative path. + # Otherwise, use full path just to avoid any ambiguities. + local rel = [ path.relative $(p) $(location) : no-error ] ; + if $(rel) = not-a-child + { + result += [ path.root $(p) [ path.pwd ] ] ; + } + else + { + result += $(rel) ; + } + } + } + else + { + # There were no wildcards in the directory path, so the files are all in + # the source directory of the project. Just drop the directory, instead + # of making paths absolute. + result = $(paths:D="") ; + } + + return $(result) ; +} + + +# This module defines rules common to all projects. +# +module project-rules +{ + rule using ( toolset-module : * ) + { + import toolset ; + import modules ; + import project ; + + # Temporarily change the search path so the module referred to by + # 'using' can be placed in the same directory as Jamfile. User will + # expect the module to be found even though the directory is not in + # BOOST_BUILD_PATH. + local x = [ modules.peek : BOOST_BUILD_PATH ] ; + local caller = [ CALLER_MODULE ] ; + local caller-location = [ modules.binding $(caller) ] ; + modules.poke : BOOST_BUILD_PATH : $(caller-location:D) $(x) ; + toolset.using $(1) : $(2) : $(3) : $(4) : $(5) : $(6) : $(7) : $(8) : $(9) ; + modules.poke : BOOST_BUILD_PATH : $(x) ; + + # The above might have clobbered .current-project. Restore the correct + # value. + modules.poke project : .current-project + : [ project.target $(caller) ] ; + } + + import modules ; + + rule import ( * : * : * ) + { + modules.import project ; + + local caller = [ CALLER_MODULE ] ; + local saved = [ modules.peek project : .current-project ] ; + module $(caller) + { + modules.import $(1) : $(2) : $(3) ; + } + modules.poke project : .current-project : $(saved) ; + } + + rule project ( id ? : options * : * ) + { + import errors ; + import path ; + import project ; + + local caller = [ CALLER_MODULE ] ; + local attributes = [ project.attributes $(caller) ] ; + if $(id) + { + $(attributes).set id : $(id) ; + } + + local explicit-build-dir ; + + for n in 2 3 4 5 6 7 8 9 + { + local option = $($(n)) ; + if $(option) + { + $(attributes).set $(option[1]) : $(option[2-]) ; + } + if $(option[1]) = "build-dir" + { + explicit-build-dir = [ path.make $(option[2-]) ] ; + } + } + + # If '--build-dir' is specified, change the build dir for the project. + local global-build-dir = + [ modules.peek project : .global-build-dir ] ; + + if $(global-build-dir) + { + local location = [ $(attributes).get location ] ; + # Project with an empty location is a 'standalone' project such as + # user-config or qt. It has no build dir. If we try to set build dir + # for user-config, we shall then try to inherit it, with either + # weird or wrong consequences. + if $(location) && $(location) = [ $(attributes).get project-root ] + { + # Re-read the project id, since it might have been changed in + # the project's attributes. + id = [ $(attributes).get id ] ; + # This is Jamroot. + if $(id) + { + if $(explicit-build-dir) && + [ path.is-rooted $(explicit-build-dir) ] + { + errors.user-error Absolute directory specified via + 'build-dir' project attribute : Do not know how to + combine that with the --build-dir option. ; + } + # Strip the leading slash from id. + local rid = [ MATCH /(.*) : $(id) ] ; + local p = [ path.join + $(global-build-dir) $(rid) $(explicit-build-dir) ] ; + + $(attributes).set build-dir : $(p) : exact ; + } + } + else + { + # Not Jamroot. + if $(explicit-build-dir) + { + errors.user-error When --build-dir is specified, the + 'build-dir' project : attribute is allowed only for + top-level 'project' invocations ; + } + } + } + } + + # Declare and set a project global constant. Project global constants are + # normal variables but should not be changed. They are applied to every + # child Jamfile. + # + rule constant ( + name # Variable name of the constant. + : value + # Value of the constant. + ) + { + import project ; + local caller = [ CALLER_MODULE ] ; + local p = [ project.target $(caller) ] ; + $(p).add-constant $(name) : $(value) ; + } + + # Declare and set a project global constant, whose value is a path. The path + # is adjusted to be relative to the invocation directory. The given value + # path is taken to be either absolute, or relative to this project root. + # + rule path-constant ( + name # Variable name of the constant. + : value + # Value of the constant. + ) + { + import project ; + local caller = [ CALLER_MODULE ] ; + local p = [ project.target $(caller) ] ; + $(p).add-constant $(name) : $(value) : path ; + } + + rule use-project ( id : where ) + { + import modules ; + # See comment in 'load' for explanation. + local caller = [ CALLER_MODULE ] ; + modules.poke $(caller) : .used-projects : + [ modules.peek $(caller) : .used-projects ] + $(id) $(where) ; + } + + rule build-project ( dir ) + { + import project ; + local caller = [ CALLER_MODULE ] ; + local attributes = [ project.attributes $(caller) ] ; + + local now = [ $(attributes).get projects-to-build ] ; + $(attributes).set projects-to-build : $(now) $(dir) ; + } + + rule explicit ( target-names * ) + { + import project ; + # If 'explicit' is used in a helper rule defined in Jamroot and + # inherited by children, then most of the time we want 'explicit' to + # operate on the Jamfile where the helper rule is invoked. + local t = [ project.current ] ; + for local n in $(target-names) + { + $(t).mark-target-as-explicit $(n) ; + } + } + + rule always ( target-names * ) + { + import project ; + local t = [ project.current ] ; + for local n in $(target-names) + { + $(t).mark-target-as-always $(n) ; + } + } + + rule glob ( wildcards + : excludes * ) + { + import project ; + return [ project.glob-internal [ project.current ] : $(wildcards) : + $(excludes) : glob ] ; + } + + rule glob-tree ( wildcards + : excludes * ) + { + import project ; + + if $(wildcards:D) || $(excludes:D) + { + errors.user-error The patterns to 'glob-tree' may not include + directory ; + } + return [ project.glob-internal [ project.current ] : $(wildcards) : + $(excludes) : glob-tree ] ; + } + + # Calculates conditional requirements for multiple requirements at once. + # This is a shorthand to reduce duplication and to keep an inline + # declarative syntax. For example: + # + # lib x : x.cpp : [ conditional gcc debug : + # DEBUG_EXCEPTION DEBUG_TRACE ] ; + # + rule conditional ( condition + : requirements * ) + { + local condition = $(condition:J=,) ; + if [ MATCH (:) : $(condition) ] + { + return $(condition)$(requirements) ; + } + else + { + return $(condition):$(requirements) ; + } + } + + rule option ( name : value ) + { + if $(__name__) != site-config && $(__name__) != user-config && $(__name__) != project-config + { + import errors ; + errors.error "The 'option' rule may be used only in site-config or user-config" ; + } + import option ; + option.set $(name) : $(value) ; + } +} -- cgit v1.2.3